6. Record Button – Press to record video (even without video input), press again to stop and save file. Long time (about 3 seconds) press to switch PLAY mode and DATA mode.
7. PWR LED – It will light green when you connect DC power or computer’s USB port.
8. REC LED – It will light red and flash when ezcap272 is recording.
Use the RCA video audio cable (usually come with video source device included) to connect to the video source and INPUT VIDEO and L/R AUDIO of device.
The RCA connectors to VHS, yellow = video, white = audio left channel, red = audio right channel.
ezcap272 with two video output – HDMI OUT and AV OUT.
Use HDMI cable or 3.5MM to RCA cable (come with the device in box) to connect with HDMI OUT or AV OUT, and another side connects to TV or monitor.
TV or monitor will show the video if both of POWER DC, VIDEO INPUT and VIDEO OUTPUT are ready.
Don’t connect HDMI and AV cable at same time. If you connect HDMI and AV cable at same time, only AV OUT is effective. And HDMI OUT is useless even you pull AV cable out. You should pull HDMI out then push in again, then HDMI OUT is effective.
POWER AND DATA
Use USB cable to connect with 5V DC for play ezcap272 device.
Use USB cable to connect with computer’s USB port for power or managing recorded files or updating firmware.
MICRO SD CARD
Plug Micro SD card into the slot with right direction, the TV or monitor screen will show “Card In” when plugged. And will show “Card Out” when remove Micro SD Card from device.
For file safety, Micro SD card better be empty and format before using, support FAT32 and exFAT, does not support NTFS, better 16GB.
To remove Micro SD card, just press it again, let it pop-up.
You will preview the connecting video on TV or monitor when all connections are ready, press ‘RECORD” button to record video, and REC red led will flash, it means it’s recording. Press again to stop recording, led turns off, and show you “Saving File” on TV.
Image will show you “No Card Disk” if you don’t insert Micro SD Card or insert the error card and press RECORD button. Please insert the Micro SD Card or check it.
Note: ezcap272 Analog Video Recorder will save a file and start to build another new file if you long time record more than 2 hours and 42 minutes.
You have two ways to save your recorded video files.
Connect DC port to computer’s USB port with mini USB cable, then long press (about 3 seconds) RECORD button to switch to DATA mode – will show you DATA and USB drive picture on screen, then you can find out the Micro SD Card disk on your computer. Open it, and find your recorded video files like ezcap0001.avi … Copy them into your computer and play by media software. Long time press again will back to RECORD mode – will show you TVIN and preview video on screen.
Or, remove the Micro SD Card from device, and copy the recorded files from Micro SD Card to your computer or other digital devices.
RCA CVBS analogue video
RCA Analogue L/R audio
CVBS analogue video by 3.5mm to 3RCA cable, HDMI
Analogue L/R audio by 3.5mm to 3RCA cable, HDMI
Video Tape, Camcorder Tape, VHS, VCR, DVD Player, DVR, Hi8, Game Player ...
Two indicator lights for power and record.
76(L) × 81(W) × 23(H) mm
ezcap272 Analog Video Recorder
USB cable for power or data,3.5mm to 3RCA cable for AVOUT,Manual, USB power adapter (option)
Supports extra Micro SD Card Max 16GB, doesn't support NTFS format